Section 13.02.400. Riding bicycles on roadways and bicycle paths.

	(a)  A person operating a bicycle upon a roadway shall ride as near to the right side of the roadway as practicable, and shall give way to the right as far as practicable to a motor vehicle proceeding in the same direction when the driver of the motor vehicle gives audible signal.  
	(b)  Persons riding bicycles on a roadway may not ride more than two abreast except on paths or parts of roadways set aside for the exclusive use of bicycles. Persons riding bicycles two abreast may not impede traffic and, in a laned roadway, shall ride within the farthest right lane.  
	(c)  When a shoulder of the highway is maintained in good condition, an operator of a bicycle shall use the shoulder of the roadway.  
	(d)  A person operating a bicycle on a trail, path, sidewalk, or sidewalk area shall  
		(1) exercise care to avoid colliding with other persons or vehicles;  
		(2) give an audible signal before overtaking and passing a pedestrian; and  
		(3) yield the right-of-way to any pedestrian.  
	(e)  Repealed 6/28/79.  
	(f)  A person riding a bicycle intending to turn left shall, unless he dismounts and crosses as a pedestrian, comply with the provisions of sec. 200 of this chapter. The operator of a bicycle must give a signal by hand and arm continuously during the last 100 feet traveled unless the hand is needed in the control or operation of the bicycle. When stopped to await an opportunity to turn, a hand and arm signal must be given continuously by the operator.  
	(g)  No person may ride a bicycle upon a sidewalk in a business district or where prohibited by an official traffic-control device.  
	(h)  No bicycle race may be conducted upon a roadway, except as provided under AS 05.35.  

Authorities

28.05.011

Notes

Reference

13 AAC 02.215

Authority

AS 28.05.011

History

In effect before 7/28/59; am 12/15/61, Register 3; am 8/10/66, Register 22; am 12/31/69, Register 31; am 6/28/79, Register 70