Section 5.24.331. Gillnet specifications and operations.  


Latest version.
  • 	(a)  Copper River and Bering River Districts:  
    		(1) a person may not operate more than one gillnet from a drift gillnet vessel; a drift gillnet may not exceed 150 fathoms in length, hung measure;  
    		(2) a gillnet fished by a valid interim-use or entry permit holder may not be fastened in any manner to a gillnet fished by another interim-use or entry permit holder;  
    		(3) gillnets with mesh size less than eight inches may not be more than 60 meshes in depth; gillnets with mesh size eight inches or larger may not be more than 40 meshes in depth;  
    		(4) drift gillnet specifications for the Copper River District may be modified in accordance with 5 AAC 24.360;  
    		(5) repealed 4/2/88;  
    		(6) repealed 4/30/91;  
    		(7) gillnets with mesh size greater than six inches will not be allowed in the Copper River District before July 15 unless specified by emergency order in accordance with 5 AAC 24.360.  
    	(b)  Eshamy, Coghill, and Unakwik Districts:  
    		(1) in the Eshamy District  
    			(A) no person may operate, or have on board a vessel, more than 150 fathoms of set gillnet in the aggregate;  
    			(B) no single set gillnet may exceed 100 fathoms in length;  
    			(C) set gillnets must be operated in substantially a straight line, except  
    				(i) in the Crafton Island Subdistrict, no more than 10 fathoms of a single gillnet may be used as a single hook; and  
    				(ii) in the Main Bay Subdistrict, as provided in 5 AAC 24.367(b)(3);  
    			(D) no person may operate more than three set gillnets;  
    			(E) repealed 4/9/89;  
    			(F) a set gillnet buoy may not be more than 20 feet from the seaward end of the set gillnet to which it is attached;  
    			(G) in the Crafton Island Subdistrict, the shoreward end of a set gillnet or set gillnet lead may not be operated in water deeper than four fathoms at low tide;  
    		(2) repealed 5/11/85;  
    		(3) the operation of each gillnet shall be performed or assisted by the fisherman who holds the valid interim-use or entry permit card for that gear;  
    		(4) drift gillnets may not be longer than 150 fathoms;  
    		(5) in the Eshamy District, set gillnets may be attached to seine webbing on the inshore end not to exceed 10 fathoms in length; the seine webbing may remain set during the open fishing season;  
    		(6) before the first Monday in July, unless modified by emergency order, in the Coghill, Unakwik, and Eshamy Districts and the Port Chalmers Subdistrict, gillnets with a mesh size of less than eight inches may not be more than 60 meshes in depth and gillnets with a mesh size of eight inches or greater may not be more than 40 meshes in depth;  
    		(7) repealed 4/2/88;  
    		(8) during periods established by emergency order for the protection of pink salmon, gillnet mesh size may be restricted to a minimum of five and three-eighths inches.  
    	(c)  Notwithstanding 5 AAC 39.105(d)(3), for the purpose of this section, a gillnet shall be considered to be a drift gillnet unless the gillnet has been set, staked, anchored or otherwise fixed.  
    	(d)  Vessels that are in transit from one fishing district to another fishing district may be towed and each vessel may carry its own legal limit of fishing gear in the aggregate.  
    	(e)  The weight of leadline used on a drift gillnet may not be more than two and one-quarter pounds per fathom of gillnet.  
    	(f)  In the Prince William Sound Area,  
    		(1) no more than one vessel may be used to operate a drift gillnet;  
    		(2) notwithstanding 5 AAC 39.105(d)(3), a person may not operate a drift gillnet when the vessel to which the gillnet is attached is grounded, or when any part of the gillnet is grounded above the waterline;  
    		(3) a person may not use mechanical power to hold a vessel in substantially the same geographical location while attached to a drift gillnet.  
    

Authorities

16.05.060;16.05.251

Notes


Authority
AS 16.05.060 AS 16.05.251
History
In effect before 1985; am 5/11/85, Register 94; am 4/16/86, Register 98; am 3/29/87, Register 101; am 4/2/88, Register 105; am 4/9/89, Register 110; am 4/30/91, Register 118; am 5/22/94, Register 130; am 3/30/2000, Register 153; am 5/11/2003, Register 166; am 3/24/2012, Register 201